This 2-component adhesive is used to glue the heating cartridges into the handlebars. It is also good for gluing the handles on the handlebar, if they are not already glued from the factory.
Furthermore, it can also be used well as a universal construction adhesive because it combines a wide range of adhesive properties with high temperature resistance and a tough, hard finish. Thanks to the double cartridge with the enclosed mixing tube, the adhesive is very easy to process. The mixed adhesive is applied directly & cleanly on the splice.
- temperature resistant up to +120°C
- Open time about 5 minutes
- Hand-tight after approx. 30 minutes
- Final after 3 hours
All times given at room temperature (20 - 25 ° C).
Spare mixers are available separately.
ProcessingClean surfaces of grease, dust and dirt. Attach the enclosed mixing nozzle, lock and discard the first 2 cm of pressed-out adhesive. Then glue and fix parts until the splice is hand-tight. Store cool and dry. Please also note the information and notes in the safety data sheets (see tab).