Grip Heating Comfort SPC-5

Hier geht es zur Montageanleitung der neuen Systeme : Griffheizung Standard Neue Version

Griffheizungssystem mit digitalem Leistungsteller und Lenkertaster

Größe 
Taster 
239,95 €
incl. 19% VAT , plus shipping costs
  • Available immediately
Description

Coolride Grip Heating Comfort SPC-5

Update 2023: Heating cartridges with clamp mounting, quick & easy installation without curing time! Thermal performance once again improved!

What is the Coolride grip heating system Comfort?

The grip heating System Comfort is based on a pair of Coolride heating cartridges that are built into the handlebars and specifically heat the grip area from inside. They are controlled with a powerful, 5-stage electronic power controller, which can be installed completely invisibly due to its small dimensions. It is operated via a discreet, waterproof LED push button made of anodized aluminum..

 

Comfort or Comfort Alpin?

 

The SPC-5 and SPC-5TC power controllers follow a puristic operating concept. Teay are identical in their basic functions. The SPC-5TC (Alpine) power controller also offers temperature compensation. A temperature sensor continuously registers changes of the ambient temperature, e.g. by drivingin the mountains or at changing weather conditions, and independently changes the heat output in 20 finely tuned levels. Treat yourself to optimal thermal comfort!

 

You can find the "Comfort Alpin" version here.

 

In Detail

•Crash-proof and practically invisible

•strong 52 Watt heating power

•no wear & tear

•No interference by cables, as with heated grips or heated gloves

•Thereby no compromise of safety

•heating power adjustable in 5 levels

•High-quality FEP-insulated cables, cold-elastic down to -100°C / -148°F , heat-resistant up to 205°C/400°F

•Monolithic construction without loose / vibration-sensitive parts

•Optimized thermal conductivity

 

Power Controller Features

•5 selectable power levels

•Variable preheating phase (0-15 min at 100% power), can be terminated at any time

•Memory function saves the power level of the last ride

•Auto-switch-on

•Switch-on delay for battery-saving starting

•Shutdown in the event of short circuit / excess temperature

•Display of errors by a flashing code in the control unit

•Automatic reset of the automatic fuse

•Integrated electronic load relay allows operation on modern motorcycles with electronic current monitoring

•Minimalist operation via handlebar button with integrated LED and aluminum housing

•Small, easy to install electronic box (just 37 x 26 x 5 mm)

•High-quality automotive cables and connectors in OEM quality

•Waterproof according to IP67 (except output connector)

•Reverse polarity protection

•Excellent EMC compatibility

•Easy installation and operation

 

 

Selecting the correct size & options

 

Choosing the size

 

Select the required size of the heating cartridges according to the table below:

Handle bar inner diameter [mm]

Size heating cartridges

14,0 -16,9

S - 14mm

17,0 – 19,9

M - 17mm

20,0 - 23,0

L - 20mm

 

Examples:

•16,9 mm inner diameter = Size S

•17,0 mm inner diameter = Size M

•18,2 mm inner diameter = Size M

 

Installation Preparation:

To mount handlebar end weights or Hand guards the heating cartridges feature an internal thread size M8 at the end. Thread adaptors for M6 are included in the kit.

 

Color & Size of the Display and Control Unit

 

The display and control unit (push button) is optionally available in black or natural colored aluminum. Both color variants are made of anodized aluminum. The unit is available in two sizes for metric and imperial size handlebars. Choose metric for handlebars with 22.23mm outer diameter or imperial for handlebars with 25.40 mm /1 inch outer diameter.

 

Scope of supply

• 2 heating cartdidges (90 mm long, à 26 Watt = 52 Watt total heating power) with FEP-insolated wires (each 120 cm long)

• 1 power controller SPC-5 with 6A load capacity (= 72W at 12V)

• 1 waterproof display & control unit for handlebar mounting, made of anodized aluminum, color selectable

• 1 ground cable

• 1 fuse module

• 2 spacer plates

• 2 screws M8x14

• 2 thread adapters M8 to M6

• 6 expanders

• 15ml thermal compound

• 2 heat shrink tubing sections

• 4 Japan terminals with insulating sleeves

• 1 installation instruction with wiring diagram

 

 

Coolride Grip Heating Systems are hand-made in the German town of Düren.

 

The most commonly asked questions are answered in our FAQ section. We are also happy to help by e-mail or phone!

Write the first review for this item and help others make a purchase decision!

There are no reviews yet.